The core of how Drone-Hacks achieves its hacks is our Custom Flight Controller or CFC, this is what allows us to modify the stock values and limits set by DJI.
With the CFC included in Drone-Hacks V2, we can now modify certain elements of our hacks “on the fly” without the need to re-connect the drone to your PC and re-do the hack.
As commands are added to the CFC, this page will be updated with them.
¶ Where To Make The Changes?
All CFC commands are made by editing the ‘Name’ field In DJI Fly, simply open up the Settings and tap in About. You will see a field called “Name” which can be edited. Adding things into here can add or remove certain hack features, these are fully explained below.
Commands and NOT case sensitive, so ‘DH FCC ON’ is valid, as is ‘dh FCC on’, and ‘dh fcc on’ for example.
¶ FCC Control
Command: DH FCC On
Result: If when you hacked your drone using Drone-Hacks V2, you didn't enable FCC, this command will turns on the FCC portion of the hack during the current flight. If the drone is rebooted the FCC hack is disabled.
Command: DH FCC Off
Result: If when you hacked your drone using Drone-Hacks V2, you did enable FCC, this command will turns off the FCC portion of the hack during the current flight. If the drone is rebooted the FCC hack is enabled again.
